temp

KFS. Established 1987

Note for new visitors to this site. Everything we stock is for 1/24th scale (or 1/25th scale where marked) plastic or resin construction kits ONLY.

Sorry, but we do not cater for ANY diecast scales or 1/32nd plastic, or the larger Monogram 1/16th or any of the RC scales.

Kit Form Services, 7 Horbling Lane, Stickney, Boston, Lincs,

PE22-8DG, England.

Tel / Fax 01205 480766 (UK) 0044 1205 480766 (Overseas)

info@kitformservices.com

Legal Notice
The copying or reproduction of ANY parts or products under the ownership of Kit Form Service (KFS) is strictly forbidden. This includes parts & products which are current stock items, parts & products currently discontinued, & parts & products offered through the JunkYard Section of the KFS website as 'surplus to requirement', 'second quality', or 'stock clearance' items. This applies to parts & products being pirated for both commercial gain & for personal use.
Such actions are considered an offence under international copyright law. Any such action establishes grounds for a civil action and may give rise to criminal prosecution. Likewise, no image or photograph may be copied, distributed or disseminated for commercial purposes (i.e E Bay) without written permission.

Report copying & piracy to us

Please please please....ALWAYS include your shipping address with ALL pricing/shipping/ordering enquiries. By not giving your address you are wasting your time & ours. Without a shipping address we cannot work out whether you are entitled to ex-vat prices (i.e outside of the EU)... without a shipping address we cannot work out the inland or airmail costs to complete the quote. Please help us to help you.

Flemming Pedersen Truck Parts

Set of 4 tractor unit flaps

£4.25 GBP

Temporarily Sold Out Back ASAP

Set of 4 tractor unit flaps

£4.25 GBP

Temporarily Sold Out Back ASAP

Set of 4 tractor unit flaps

Full width tractor/trailer flap

Marker Lights,Tail Lights & Beacons

(See also the Briab Tail Lights 1/2/3 below for these lights, in sets, with CNC milled backboards)

Square Marker/Tail lights

Available in Red, Orange or Clear.

Please state colour choice when ordering.

Sets of 20, 5mm square lights on chrome etched fret.

See also TL Round below for complete 5mm round tail lights

Sets of 12, 5mm diameter tail light / marker light. Chrome etched backboard with hard clear/coloured cast resin lens.

See Also PE80 in the PhotoEtch section for chrome plated custom marker light backings to suit ML-Rect

Marker Lights

Available in Red, Orange or Clear.

Please state colour choice when ordering.

These are perfect for the main side marker lights on tractors & trailers

Sets of 12, 4mm x 2mm marker lights. Chrome etched backboard with hard clear/coloured cast resin lens.

Picture shows ML-Rect on the left & ML Mini on the right for comparison.

Sets of 12, 2.4mm x 1.5mm marker lights. Chrome etched backboard with hard clear/coloured cast resin lens.

A set of 18 resin backings, 2mm deep, with 6 red, 6 orange & 6 clear 5mm ML-Round lens

Tail Lights

Milled by Flemming Pedersen

A set 6 tail lights, 2 double & 4 single with 8 5mm square lens

Tail Lights

Milled by Flemming Pedersen

A set of 2 double row custom tail lights with 12 5mm square lens

Tail Lights

Milled by Flemming Pedersen

A set of 2 single row tail lights with 8 5mm square lens

Ready tinted clear cast roof beacons. Pair

Suits cars & vans, wide load markers, trailer rear beacons etc

Beacons, Small

Orange, Red, Yellow or Blue. Please state colour choice when ordering

Ready tinted clear cast roof beacons 7mm diam x 10mm high. Pair

Beacons, Large

Orange, Red, Yellow or Blue. Please state colour choice when ordering.

Ready tinted clear cast roof beacons 8.5mm diam x 10mm high, Pair

Looking for truck spotlights ?, see the TQ Section, under 'Cab Related Parts'

£3.50GBP

Please note we DO NOT export this product

Squadron Green Model Filler

Model filler, tubed, generous 65gm tube, highly recommended

£5.00GBP

Please note we DO NOT export this product

Squadron White Model Filler

Model filler, tubed, generous 65gm tube, highly recommended

£5.00GBP

Please note we DO NOT export this product

Curtain Sheets, Chain, Piping, Reflectives & Translucent Sheets

Chassis wiring pack

1 metre long + 10 split rings, 14 links per inch

As above but 10 links per inch in a heavier material

RED

Translucent Sheet

An A5 size sheet of precoloured translucent acetate.

RED

Perfect for tinted sunvisors, windows, lights & bug deflectors

( 0.25mm/10 thou thick 145mm x 210mm)

£2.75GBP

To be discontinued on selling out

BLUE

Translucent Sheet

As above but in BLUE

Blue, Sold Out & Discontinued

YELLOW

Translucent Sheet

As above but in YELLOW

£2.75GBP

To be discontinued on selling out

GREEN

Translucent Sheet

As above but in GREEN

Also perfect for military vehicle vision blocks

£2.75GBP

To be discontinued on selling out

Welcome to the New JUNK YARD Section

Discontinued Lines, Surplus New or Second Quality Resin & Metal Parts, Ex-Test Builds, Decals, Plastic Kit Parts, & Other Useful Bits & Pieces.

This section will be updated as spare parts become available. Most are just one off unless marked otherwise. (Visit often, its always first come first reserved)

A place for all end of line clearance items, discontinued parts, excess resin castings, plastic kit parts, left over decals & photoetch, time served test builds, & anything else of no use to US but could well be of use to YOU. Scroll down for the latest arrivals.

info@kitformservices.com

Red Reflective Vinyl

Self adhesive real red reflective vinyl. Last few sheets to clear, then discontinued

£2.50GBP

REDUCED TO CLEAR. RED only in stock

Above the very LAST of the multicolour FP wide Mud Flaps.

Below;- Pre shaped Winter Front Radiator Mufflers. To fit Italeri / Revell / AMT / ERTL kits . Printed on super thin white vinyl. Just cut out around the frame guide, peel away from the thick carrier backing film & glue in place.

Above the very LAST of the FP Winter Fronts

Below;- Surplus to requirement KFS Ex-Transkit vac-formed screens & etched sets. Bought a second hand transkit with missing ? or damaged etched parts ? Built a transkit & screwed up trimming the screen ? or building your own 'Concept' model & need etched badging?........these parts could be of use to you .

KFS Ex-Transkit Windscreens (new vac-formed)

Vac formed screen

KFS White Road Commander II

Vac formed screen

KFS International 9670

Vac formed screen

KFS Bedford TK / KM / MK

Vac formed screen

KFS Leyland Marathon

Vac formed screen

KFS DAF CF / Foden Alpha

Vac formed screen

KFS Seddon Atkinson 401

Vac formed screen

KFS Scammell Trunker / Routeman

KFS Ex-Transkit Photo-Etched Parts Sets

The following etched parts sets are surplus to requirement ex KFS transkit stock. Items are graded according to condition. The NEW & Best ones will be supplied first & any tarnished ones sold last. Tarnished items will usually clean up perfectly well with a little T-Cut or ordinary metal polish . All etched frets are while stocks last only.

Ex International 9670 Transkit

Ex Foden Alpha Transkit

Ex Leyland Marathon Transkit

Ex Leyland T45 Transkit

Ex Tracked Excavator Kit

Ex Bedford TM Wide Cab Transkit

Ex ERF E Series Transkit

Ex Bedford TM Narrow Cab Transkit

Good chrome but mostly with damaged Wyvern logo flag

Ex Scammell Trunker / Routeman Transkit

Good servicable, slightly tarnished

Ex Foden Condor Transkit

Ex Foden Phoenix Transkit

Decals, Resin, & White Metal Parts

KFS-63

New Unopened

Custom Graphics

6"x18" sheet.

Custom Graphics Set. This set does at least 4 models.

2 Scania dedicated & 2 Generic sets.

Price slashed to £5.00 to clear. These are now priced at less than they cost us to produce.

Sheet of 1/16th inch thick (1.6mm) real timber plywood. 24" x 6" Ideal for 13.6 metre flat bed trailer or other wooden floor bodies. Can be stained to any timber shade, planking can be pencilled on or scribed, can be sanded & polished.

£4.00GBP

Limited stock 8 pieces only

Pair of Leyland Crusader 35 ton tractor unit rear wings, from our TQ168 kit. Can be used with JY3 below & also with the TQ-177 Plumett Winch kit.

See Military Section for 'in use' pictures on the TQ168 Scammell Crusader

Double oscillating fifth wheel kit with high rise platform & run up ramps from our Leyland Crusader kit TQ168. Can be used with JY2 above.

See Military Section for 'in use' pictures on the TQ168 Scammell Crusader

BUNDLE OFFER

Plumett winch kit from our TQ168 Leyland Crusader kit, as per TQ177 but less the 4 cast white metal parts.

Complete with....

JY2 Wings AND JY3 Fifth Wheel & Ramps shown above

Second quailty. Bedford MK chassis rails, pair. 99% good, some with the odd missing bolt head or small air pocket. Any twist or distortion easily corrected with hot water. These are L&R chassis rails only. No cross members.

£5.00GBP

7 sets left

Second quailty. Firestone tyre, 8 stud,8 slot wheel .99% good. All have a flat spot at the bottom & 2 faulty wheel studs. Some have sheered off wheel studs. Requires all the studs to be removed & replaced ideally. 41mm diameter. Can be used as singles only not twins due to moulded in hub, & brake drum back plate.

£3.00GBP

per pair

7pr left

A bag of 10 cast metal rear trailer / rigid vehicle number plate holders with light.

A bag of 13 two part plastic Goodyear tyres. Origin unknown, something in 1/25th possibly.

41mm diam x 10mm wide.

Iveco EuroTech battery box & air cleaner kit

Bag of 3 C42 Larkspur radios

info@kitformservices.com